Heavy Duty Lined SUV Car Covers

Heavy-duty, cotton-lined protection for your SUV, helping shield its paintwork from sun, rain, dust and dirt. Designed to accommodate the taller bodywork of SUVs, these covers are available in three sizes for vehicles from 3.8 to 5.6 metres long, whether parked outdoors or stored in a garage.

The Dark Grey outer fabric is solution-dyed 300D Polyester Oxford, weighing 180 gsm and 250 gsm overall with the soft cotton lining. UV-resistant and water-resistant, it helps protect your vehicle from weather exposure, bird droppings and airborne pollutants. The breathable construction allows moisture and condensation to evaporate, reducing heat build-up beneath the cover.

Needle-punch stitching joins the fabric sections, while buckle clip belly straps and elastic hems beneath the front and rear bumpers help keep the cover securely in place. A storage bag and two-year manufacturer's warranty are included.

Which Size SUV Cover Do I Need?

SUV covers are available in three sizes, accommodating vehicles from 3.8 to 5.6 metres long.

There is no make-and-model index, so either check the manufacturer's dimensions for your vehicle's make, model and year, or measure your SUV yourself.

Measure length in a straight line from the front of the front bumper to the rear of the rear bumper, along the side of the vehicle and level with the ground.

Measure height from the roof to the bottom of the bodywork, excluding the gap to the ground, and width with the mirrors folded in. Don't measure over the bonnet or roof.

Choose the range that includes your vehicle's length, then check its height and width against the table.

Cover height increases with each size to accommodate larger SUVs.

FAQ's

How do I choose the right size SUV car cover?

• Check your SUV's length, height and width against our sizing table and measuring diagram.
• The three available sizes fit vehicle lengths of 3.8–4.7 m, 4.8–5.0 m and 5.1–5.6 m, with cover heights increasing from 1.4 m to 1.6 m.
• Choose the matching length range, then confirm that the height and width are suitable.

Where can I find my SUV's length, height and width?

• Dimensions are usually available in your owner's manual or on the manufacturer's website, but may vary by model year. Alternatively, measure your SUV using our diagram: length in a straight line between the bumpers, height from the roof to the bottom of the bodywork, and width with the mirrors folded in. Don't follow the curve of the bonnet or roof.

What if my SUV is close to the edge of a size range, or I'm unsure which size to choose?

• Email us at sales@coversystems.co.nz with your vehicle's make, model and year. We'll help you confirm the most suitable cover.

How is an SUV cover different from a sedan or hatchback cover?

• SUV covers are designed to accommodate taller vehicle bodywork, with cover heights of 1.4–1.6 m compared with 1.2 m for our sedan and hatchback/station wagon covers. All three ranges share the same protective fabric, soft cotton lining and securing features. Choose by body shape first, then check the measurements to establish the best fit.

Will the cover scratch my SUV's paintwork?

• The soft cotton lining provides a gentle protective surface against your vehicle's finish. Always fit the cover to a clean SUV, as trapped dirt or grit can cause scratching even with a soft lining.

Is this SUV cover suitable for outdoor use in all weather?

• Yes. The UV-resistant, water-resistant fabric helps protect against sun, rain, dust, dirt and heat, while its breathable construction allows moisture and condensation to escape. It is water-resistant rather than waterproof, so some moisture may penetrate during heavy rain. The cover is also suitable for indoor storage.

What is the SUV cover made from?

• The Dark Grey outer fabric is solution-dyed 300D Polyester Oxford, weighing 180 gsm, with a combined weight of 250 gsm including the soft cotton lining. The sections are joined using needle-punch stitching. The fabric is UV-resistant, water-resistant and breathable.

SUV covers are available in three sizes, accommodating vehicles from 3.8 to 5.6 metres long.

There is no make-and-model index, so either check the manufacturer's dimensions for your vehicle's make, model and year, or measure your SUV yourself.

Measure length in a straight line from the front of the front bumper to the rear of the rear bumper, along the side of the vehicle and level with the ground.

Measure height from the roof to the bottom of the bodywork, excluding the gap to the ground, and width with the mirrors folded in. Don't measure over the bonnet or roof.