Description / Features
|
|
|
|
| Cruisers | T-Tops | Pilot Boats | Hardtops |
- Oceansouth Jumbo Cover is specifically designed to fit center cabin style (large) boats.
- The high-cut pattern will comfortably fit over high rails and Rocket Launchers.
- ATLAS Dope Dyed Polyester Fabric 280g/m2
- Heavy-duty cover, ideal for short or long-term storage.
- Recommended for light trailering use 60km/h maximum.
Fabric Details
 
|
|
| Weight | 280 g/m2 (8.2 oz/yd2) |
| Material | 100% High Tech Polyester |
| Water Column | ≥ 150 mbar (1500 mm) |
| Light Fastness | Note 6-7 |
| Weather Fastness | Note 7-8 |
| Tensile Strength | ≈ 2100 N¹ | 1300 N² |
| Elongation | ≈ 40 %¹ | 30 %² |
| Colour Fastness to rubbing | Note 4-5³ | Note 44 |
| Chlorine Resistant | Note 4-5 |
| Water Repellency | Note 100 |
| Oil Repellency | Note 4 |
| Coating | Polyurethan [PU] |
| UV Protection Factor | UPF 50+ (measured value > UPF 80) |
How to Measure
Choose the style that best suits your boat then follow the measuring instructions to find the correct size.
STEP 1: Measure Boat Length
Measure in a straight line the centerline distance of your boat from Bow to Stern.
STEP 2: Measure Beam Width
Measure in a straight line the distance across the beam (widest point of your boat)
NOTE: It is recommended that both measurement instructions are used to help you choose
the correct cover size.
OVERALL FABRIC MEASUREMENTS
STEP 1: Measure Fabric Width
Using the ‘overall cover fabric width’ measurement of your chosen cover, measure across the widest point of your boat, over the top of any boat fittings
e.g. cabin, windscreens etc.to the point on the hull where the cover’s hem will finish.
STEP 2: Measure Fabric Length
Using the ‘overall cover fabric length’ measurement of your chosen cover, measure along the lengthFs of your boat, over the top of any boat fittings e.g. cabin, windscreens etc. to the point on the hull where the cover’s hem will finish.
Overall Cover Dimensions
FABRIC WIDTH (W)
FABRIC LENGTH (L)
| ORDER CODE | FABRIC LENGTH (L) | FABRIC WIDTH (W) |
|---|---|---|
| MA 501-0 | 7680mm | 5250mm |
| MA 501-1 | 8180mm | 5300mm |
| MA 501-2 | 8830mm | 5500mm |
| MA 501-3 | 9480mm | 5700mm |
| MA 501-4 | 10080mm | 5900mm |
| ORDER CODE |
BOAT LENGTH |
MAX. HEIGHT |
MAX. BEAM WIDTH |
|---|---|---|---|
| MA 501-0 | 5.2m – 5.8m | 1.35m | 2.4m |
| MA 501-1 | 5.8m – 6.4m | 1.35m | 2.4m |
| MA 501-2 | 6.4m – 7.0m | 1.35m | 2.5m |
| MA 501-3 | 7.0m – 7.6m | 1.5m | 2.7m |
| MA 501-4 | 7.6m – 8.2m | 1.5m | 2.9m |
Sizing Guide
| ORDER CODE |
BOAT LENGTH |
MAX. HEIGHT |
MAX. BEAM WIDTH |
|---|---|---|---|
| MA 501-0 | 5.2m – 5.8m | 1.35m | 2.4m |
| MA 501-1 | 5.8m – 6.4m | 1.35m | 2.4m |
| MA 501-2 | 6.4m – 7.0m | 1.35m | 2.5m |
| MA 501-3 | 7.0m – 7.6m | 1.5m | 2.7m |
| MA 501-4 | 7.6m – 8.2m | 1.5m | 2.9m |
New Zealand New ZealandAwesome quality and perfect size.
Once we sorted out the rope lengths it was pretty easy to put on the boat. The hardest part was threading the rope through the plastic tie down pieces but way better than the old straps. Once in place they held firm. We actually cut the rope a bit longer and put a half hitch as added strength. Nice waterproofing on the cover as well.
New ZealandGreat cover
Quick delivery, good quality and fittings. Has now been weather tested and does the job well. Easy to put on and remove despite the height of the rocket launcher. Stabi 1850 Fisher.
New Zealand New ZealandJumbo boat cover
Overall quite satisfied. The bow end of the cover needs additional tie downs if exposed to any level of wind.